Choosing a Castle Remote-Control Holder: Fit & Coffee-Table Space
The Castle Remote Control Holder is worth considering if your remotes fit its stated limit of 58 mm wide & 38 mm deep, and your table has room for an organizer 8.75 inches wide & 4 inches deep. Check both the remotes & the surface before ordering. The 38 mm measurement means front-to-back thickness, not remote length.
Measure the part of the remote that sits inside
Measure across the remote from side to side at the section that will sit in the organizer. Then measure from its front face to its back at that same section. Include any case, grip or raised battery cover that enters the compartment. If the remote widens along that section, use its widest point.
| Check | Current product specification |
|---|---|
| Remote width | Maximum 58 mm, side to side |
| Remote thickness | Maximum 38 mm, front to back |
| Organizer footprint | 8.75 inches wide × 4 inches deep |
| Organizer height | 4.75 inches |
Compare each remote separately with both limits. If either measurement exceeds the stated maximum, don't assume it will fit. For a remote at the limit or with an unusual shape, contact Lexar Prints with its measurements before ordering. These dimensions do not establish compatibility with every remote.
Check the coffee table or shelf
Mark out an 8.75-by-4-inch rectangle where you want the holder to sit. Check that it leaves room for the things already on that surface & that you can reach it from your usual seat. On a shelf, allow room above the 4.75-inch-tall organizer for the remotes to extend upward & for your hand to lift them out.
Choose the look & the recipient
Brick-pattern walls, battlements & corner towers give the holder its castle shape. The current listing offers grey, black & white; grey is shown. All three colors were available to order when this guide was published. It is a physical PETG print with visible layer lines & surface texture.
As a gift, it suits someone who enjoys medieval decor & wants a set place for remotes in a living room or gaming space. Check their remote sizes & table space first. The holder is sold on its own, with no remotes included.
See the remote holder's product photos & color choices, or browse the Castle Collection. For a separate place to return keys, read our castle entryway organizer guide.